Producent | NOCTUA |
---|---|
Numer modelu | NH-U12S SE-AM4 |
Wymiary produktu | 12.5 x 7.1 x 15.8 cm; 800 gr |
ASIN | B01N9X2YYN |
Więcej opcji zakupu
+ dostawa 19,00 zł
33% pozytywnych ocen w ciągu ostatnich 12 miesięcy
+ dostawa 57,51 zł
Noctua NH-U12S SE-AM4, Chłodzenie CPU Klasy Premium dla AMD AM4 (120 mm, Brązowy)
Ulepsz swój zakup
Wymiary elementu dł. x szer. x wys | 12.5 x 7.1 x 15.8 cm |
Marka | Noctua |
Napięcie | 12 Wolty |
Zgodne urządzenia | Desktop |
Poziom hałasu | 22.4 dB |
Materiał | Miedź (podstawa i rury ciepła), aluminium (żebra chłodzące), złącza lutowane i niklowanie |
Maksymalna prędkość obrotowa | 1500 obr./min |
Informacje o tym produkcie
- Nagradzany cooler NH-U12S to zdobywca ponad 200 nagród i rekomendacji międzynarodowych portali i czasopism o sprzęcie
- Specjalna edycja, przeznaczona do gniazda AMD AM4
- Cichy, 120-milimetrowy wentylator NF-F12 z automatyczną regulacją obrotów przez PWM
- W zestawie adapter Low-Noise i sprawdzona pasta termoprzewodząca NT-H1
- 6-letnia gwarancja producenta
Kup z
- +
- +
Klienci, którzy oglądali ten produkt, oglądali również
Informacje o produkcie
Szczegóły techniczne
Masz pytanie?
Znajdź odpowiedzi w sekcjach Często Zadawane Pytania, Opinie i Informacje o produkcie
Na Twoje pytanie mogą odpowiedzieć sprzedawcy, producenci lub klienci, którzy kupili ten produkt.
Upewnij się, że Twój wpis jest w formie pytania.
Wprowadź pytanie.
Opis produktu


Kontynuujący dziedzictwo klasycznej serii Noctua NH-U, mającej na koncie ponad 500 nagród i rekomenacji międzynarodowych portali i czasopism o sprzęcie NH-U12S stał się punktem odniesienia dla innych jednowieżowych, wąskich, wysokokompatybilnych coolerów 120 mm. Wersję SE-AM4 stworzono specjalnie dla platformy AMD AM4/AM5 (Ryzen) i wyposażono w najnowszy system mocowania SecuFirm2 dla AM4/AM5. Zestaw uzupełniają cichy wentylator NF-F12 PWM o wielkości 120 mm, sprawdzona pasta termoprzewodząca Noctua NT-H1 oraz pełna, sześcioletnia gwarancja producenta. NH-U12S SE-AM4 stanowi kompletne rozwiązanie klasy premium łączące doskonałą wydajność, świetne parametry akustyczne oraz doskonałą kompatybilność dla zestawów opartych na AM4/AM5.
|
|
|
|
---|---|---|---|
Klasyczny 120-milimetrowy tower dla doskonałej kompatybilnościWysoki na 158 mm NH-U12S mieści się w większości dostępnych na rynku obudowach mid- i high-tower. Z kolei szerokość 125 mm (włącznie z wiatrakiem i klipsami) zapobiega przysłonięciu górnego slotu PCIe na większości płytach ATX i Micro-ATX. Pełna zgodność z konfiguracjami multi-GPU. |
100% kompatybilność z RAMDzięki budowie slim i głębokości żeberek wynoszącej 45 mm NH-U12S nie zasłania slotów RAM na płytach AM4 nawet w konfiguracji dwuwentylatorowej. Oznacza to łatwy dostęp do modułów RAM i umożliwia montaż pamięci z wysokimi rozpraszaczami ciepła, lub opcjonalnego chłodzenia pamięci. |
NF-F12 120-milimetrowy wentylator Focused FlowPolecany w ponad 150 publikacjach o sprzęcie i przez tysiące entuzjastów z całego świata, najwyższej klasy 120-milimetrowy wentylator Noctua NF-F12 Focused Flow łączy doskonałe statyczne ciśnienie, wydajny radiator i zaskakująco cichą pracę. |
Pasta termoprzewodząca NT-H1Uznana pasta termoprzewodząca Noctua NT-H1 to profesjonalnej klasy rozwiązanie o minimalnej rezystancji cieplnej, łatwe w użyciu i charakteryzujące się długofalową niezawodnością. Wybierana raz za razem przez overclockerów i entuzjastów z całego świata stała się punktem odniesienia dla wysokiej klasy past termoprzewodzących. |

Wymiary
- Wysokość (bez wentylatora): 158mm
- Szerokość (bez wentylatora): 125mm
- Głębokość (bez wentylatora): 45mm
- Wysokość (z wentylatorem): 158mm
- Szerokość (z wentylatorem): 125mm
- Głębokość (z wentylatorem): 71mm
- Waga (bez wentylatora): 580g
- Waga (z wentylatorem): 755g
Materiał
Miedź (podstawa i ciepłowody), aluminium (żeberka), lutowane połączenia i niklowanie
Specyfikacja coolera
Kompatybilność z gniazdami
Dedykowana dla gniazda AM4/AM5 chłodnica NH-U12S SE-AM4 posiada system mocowania wyłącznie dla platformy AM4/AM5.
Zakres dostawy
- NF-F12 PWM wiatrak klasy premium
- NA-RC6 Adapter Low-Noise (L.N.A.)
- Wysokogatunkowa pasta termoprzewodząca NT-H1
- Zestaw montażowy SecuFirm2 dla AM4/AM5
- Podkładki antywibracyjne i klipsy do mocowania drugiego wentylatora NF-F12
- Metalowa odznaka na obudowę

Specjalna edycja dedykowana dla AM4/AM5
NH-U12S SE-AM4 przynosi sprawdzoną wydajność i cichość chłodzenia NH-U12 na grunt nowej platformy AMD AM4/AM5. Doskonale równoważąc wydajność, ciszę i kompatybilność NH-U12S SE-AM4 stał się doskonałym wyborem dla najmocniejszych systemów AM4/AM5.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
NH-U12S | NH-U12S TR4-SP3 | NH-U12S SE-AM4 | NH-U12S redux | NH-U12S chromax.black | NH-U12A | |
LGA2066, LGA2011-0 & LGA2011-3 | ✓ | X | z NM-i20xx | ✓ | ✓ | ✓ |
LGA1700 | ✓ | X | z NM-i17xx-MP78 | ✓ | ✓ | ✓ |
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | X | z NM-i115x-1200 | ✓ | ✓ | ✓ |
LGA775 & LGA1366 | z NM-I3 | X | z NM-I3 | z NM-I3 | z NM-I3 | z NM-I3 |
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X | X |
Xeon LGA3647 | X | X | X | X | X | X |
Xeon LGA4189 | X | z NM-i4189 | X | X | X | X |
AM5 | ✓ | X | ✓ | ✓ | ✓ | ✓ |
AM4 | ✓ | X | ✓ | ✓ | ✓ | ✓ |
sTRx4, sWRX8, TR4, SP3 | X | ✓ | X | X | X | X |
Opinie o produkcie
5 gwiazdek |
|
91% |
4 gwiazdki |
|
7% |
3 gwiazdki |
|
2% |
2 gwiazdki 0% (0%) |
|
0% |
1 gwiazdka |
|
1% |
Recenzje klientów, w tym oceny produktu w postaci gwiazdek, pomagają klientom dowiedzieć się więcej o produkcie i zdecydować, czy jest dla nich odpowiedni.
Aby obliczyć ogólną ocenę w postaci gwiazdek i procentowy podział według gwiazdek, nie używamy prostej średniej. Zamiast tego nasz system bierze pod uwagę takie kwestie, jak aktualność recenzji i czy recenzent kupił produkt w serwisie Amazon. Analizuje również recenzje w celu zweryfikowania wiarygodności.
Dowiedz się więcej, jak działają opinie klientów w serwisie AmazonNajlepsze opinie o produkcie

Fitting was easy enough though a little fiddly, most will need an extra hand to help with holding the backplate in place. Adding the brackets was the hard part, took me 10 minutes up front to check all parts fit and to practice how to remove the clips that hold on the fan and another 10 to install.
Once the brackets were in place the spring loaded screws were easy enough to get located correctly without disturbing the paste too much. Fitting the fan in situ is easier than expected but there's a very specific way of doing it. Once mastered it can be done in a matter of moments.
Performance wise, my Ryzen 3600xt was idling around 40C and up to 74 in benchmarks on the standard cooler, this gives about the same idle temp but with a less harsh fan curve so runs much quieter, under load it's been maxxing at 68 with less noise so it's a win in my eyes. Was hoping for potentially a little lower but all considered it has been promising so far.
Comes with a nice little metal badge to stick to the case and a screwdriver but can't help feel the screwdriver was pointless. If you're fitting these yourself you should already have one. If not, question whether it's something you can do yourself. Would have preferred they spent more on the cooler than these albeit welcome extras but for the price it's about right.
Not as big and heavy as my prior be quiet cooler I used with my last system but that was high end. This I would regard as upper middle tier. Not sure how able it is with overclocking but I'd seek something beefier for that on a Ryzen.
4/5 because it's small for the price but if 4.5 could be given it would be a fairer score.
All in, very happy with the quieter and cooler running CPU I now have, so I can enjoy my new system how I have been looking forward to.
Warning: watch how you use the included screwdriver, I used it recently for other uses and found it sheds metal swarf (small pieces of metal coating) quite fast. Not what you want dropping into your system! Almost includes to drop to 3 stars because of this issue but overall the cooler has been great so just be warned. Don't use the screwdriver in your system!


Opinia napisana w Wielkiej Brytanii dnia 22 grudnia 2020
Fitting was easy enough though a little fiddly, most will need an extra hand to help with holding the backplate in place. Adding the brackets was the hard part, took me 10 minutes up front to check all parts fit and to practice how to remove the clips that hold on the fan and another 10 to install.
Once the brackets were in place the spring loaded screws were easy enough to get located correctly without disturbing the paste too much. Fitting the fan in situ is easier than expected but there's a very specific way of doing it. Once mastered it can be done in a matter of moments.
Performance wise, my Ryzen 3600xt was idling around 40C and up to 74 in benchmarks on the standard cooler, this gives about the same idle temp but with a less harsh fan curve so runs much quieter, under load it's been maxxing at 68 with less noise so it's a win in my eyes. Was hoping for potentially a little lower but all considered it has been promising so far.
Comes with a nice little metal badge to stick to the case and a screwdriver but can't help feel the screwdriver was pointless. If you're fitting these yourself you should already have one. If not, question whether it's something you can do yourself. Would have preferred they spent more on the cooler than these albeit welcome extras but for the price it's about right.
Not as big and heavy as my prior be quiet cooler I used with my last system but that was high end. This I would regard as upper middle tier. Not sure how able it is with overclocking but I'd seek something beefier for that on a Ryzen.
4/5 because it's small for the price but if 4.5 could be given it would be a fairer score.
All in, very happy with the quieter and cooler running CPU I now have, so I can enjoy my new system how I have been looking forward to.
Warning: watch how you use the included screwdriver, I used it recently for other uses and found it sheds metal swarf (small pieces of metal coating) quite fast. Not what you want dropping into your system! Almost includes to drop to 3 stars because of this issue but overall the cooler has been great so just be warned. Don't use the screwdriver in your system!


Ryzen 1600
MSI B350m Gaming Pro
Corsair LPX 16GB DDR4 3200 (@2997Mhz CL 15)
Case Antec 900
Compared to the Wraith cooler this has reduced
Idle temp from 35C to 29C and
Full load temps from 60C to 49C
This is with room temp of 23C, Ambient Case temp of 35C and without modifying fan curve profiles in settings.
Fan RPM remains low so I can't hear it against my case fans at all.
Just be aware if you have a side case fan that is near where the CPU fits as the cooler stack almost reached the left case panel in my Antec 900 forcing me to remove the side case fan and move it to the bottom bay, which is fine by me as it still helps with increasing intake down there with doubled up fans.

Asus B350 Prime
You can use the existing back plate that came with your main-board.
Easy to install its manufactured at a high standard so it makes fun to work with.
Screwdriver, thermal paste etc. included.
I cant hear the cooler at all, runs most of the time with 718rpm - 961rpm max. playing gtav, I dont use the "silencer cable adapter" that is supplied with the cooler. Might be even quieter using that adapter if you have the need.
Used a CM 212 Turbo LED before, was great but the noctua is just a different level that not only includes the cooling ability.

This is well worth the price. The am4 bracket kit let's you rotate to any direction you want to blow the air. Thermal Paste, screwdriver long long neck at that on an L bend. Brackets rubber sticky past to limit vibration if you fit an aftermarket second fan. And the stock fan is oh so quiet. Best air cooler ever and super easy to fit. Instructions are simple the images in them are easy to understand.
I can't recommend this enough.


Opinia napisana w Wielkiej Brytanii dnia 26 września 2020
This is well worth the price. The am4 bracket kit let's you rotate to any direction you want to blow the air. Thermal Paste, screwdriver long long neck at that on an L bend. Brackets rubber sticky past to limit vibration if you fit an aftermarket second fan. And the stock fan is oh so quiet. Best air cooler ever and super easy to fit. Instructions are simple the images in them are easy to understand.
I can't recommend this enough.

